Skip to content

WordPress surveys and polls guide: plan, write and run them

Plan a website survey or poll around one decision: pick the format, write fair questions, keep it short, build it in WordPress and act on the answers.

By . 8 min read. .

Use a poll when you want one quick, public answer, and a survey when you need several answers to make a decision. Either way, the work that matters happens before you open a plugin: decide what you will change based on the answers, write fewer questions than you think you need, and plan where the answers will go.

This guide walks through that order. Each section links to a deeper post, so you can treat this page as the map and the others as the detail. The examples use Quizably, a free WordPress plugin with Survey and Poll quiz types, but the planning and writing advice works with any tool.

Survey, poll or quiz: which one do you need?

The three look alike on the page. They differ in what the visitor gets at the end.

FormatQuestionsWhat the visitor sees at the endBest for
PollOneThe live tally of everyone’s votesA quick opinion, engagement in a post
SurveySeveralA thank-you screenFeedback, research, planning
QuizSeveralA personal result or a scoreLeads, recommendations, learning

A simple test: if the visitor should leave with something for themselves, it’s a quiz. If you are the one who needs the answers, it’s a survey. If everyone should see how the crowd voted, it’s a poll.

In Quizably these map to quiz types. Survey / Form ends on a thank-you screen (“Your response has been recorded.”). Poll / Single question ends on a results screen that shows each option with its percentage, a bar and the vote count, and marks the visitor’s own pick. You choose the type when you create the quiz and can’t change it afterward, so pick it first.

Start with the decision, not the questions

The most common survey mistake is writing questions before deciding what you will do with the answers. You end up with twenty questions, a long tail of drop-off, and a spreadsheet nobody acts on.

Write one sentence before anything else: “Based on the answers, I will decide ___.” For example:

  • “I will decide which of three course topics to build next.”
  • “I will decide whether to offer a monthly plan.”
  • “I will decide which onboarding emails to rewrite.”

Then, for each question you draft, ask whether its answer could change that decision. If it couldn’t, cut it. A survey with five questions that all feed the decision beats one with fifteen that are merely interesting.

Two more things to settle up front:

  1. Who should answer. Customers who just bought, readers of one blog category, members of a group. The audience decides where you place the survey and how long it can be.
  2. Whether you need to know who answered. If you plan to follow up with people, you need an email. If you only need the overall picture, you may not. This choice affects where answers end up, which is covered below.

How to write survey questions that get honest answers

Good wording does more for data quality than any feature. The rules are simple and easy to break:

  • Ask one thing per question. “How happy are you with the price and the support?” can’t be answered honestly by someone who loves one and hates the other.
  • Ask about what people do now, not what they would do. “What do you use for this today?” beats “Would you buy X?”, because saying yes to a hypothetical costs nothing.
  • Keep options balanced. If you offer “Great, Good, OK”, there is nowhere for unhappy people to go.
  • Avoid leading words. “How much did you enjoy the workshop?” assumes they enjoyed it.

How to write survey questions people answer honestly covers each rule with before and after examples.

Choosing the question type

The type of question shapes the answer you get:

  • Single or multiple choice for facts and preferences you can count. These are the easiest to analyze, because the analytics chart how often each option was picked.
  • Rating for strength of feeling. In Quizably a rating question is 5 or 10 points. Decide what the ends mean and say so in the question text, since there are no separate end labels.
  • Short text for the “why” behind a number, or for answers you can’t predict. Use it sparingly, because typing is the slowest thing you can ask of someone on a phone.

A pattern that works well: a closed question to count, then an optional open one to explain. “How likely are you to renew?” followed by “What would make you more likely?”

How long should a survey be?

Every extra question loses some people. There is no magic number, but these rules hold up:

  • Five to eight questions is a sensible ceiling for a general audience.
  • Cold visitors (people who arrived from a search and don’t know you) tolerate fewer than customers who already trust you.
  • Required questions should be the ones you truly can’t do without. Forcing an answer often gets a random click instead of a real one.
  • Put easy questions first and the open text question near the end.

Quizably shows a “Question 3 of 6” style counter on each question, which helps people see the end is near.

Ready-made question sets to adapt

You rarely need to start from a blank page. These posts give you question lists you can cut down to fit your decision:

Treat these lists as a menu, not a script. Pick the three to six questions that feed your decision and drop the rest, even the good ones.

How to build a survey or poll in WordPress

Once the questions are written, building is the quick part. With Quizably:

  1. Open Quiz Builder in the WordPress admin and start a new quiz.
  2. Choose the Survey / Form type for a survey, or Poll / Single question for a poll.
  3. Add your questions on the Questions tab and preview them as you go.
  4. Decide on the email form: off, skippable or required, and whether it appears before the questions or right before the end.
  5. Publish, then add it to a page with the Advance Quiz block or the [quizably_quiz id="..."] shortcode.

The full walk-through, including consent wording and where answers show up, is in how to create a survey in WordPress. For a single-question poll, including how the results screen works, see how to add a poll to your WordPress site.

A few things to know about polls in Quizably before you rely on one:

  • The tally counts completed submissions only, and only the poll’s first question, so keep a poll to one question.
  • There is no one-vote-per-visitor control. A retake adds another vote, so treat the result as a pulse check rather than a binding vote.
  • The tally refreshes every 20 seconds or so, not instantly.

There is also no branching editor, so every visitor gets the same set of questions. If you need very different questions for different groups, run two short surveys and place each where that group already is.

Choosing a survey plugin

If you are still picking a tool, judge it on what you’ll actually need: the question types you plan to use, how you get the answers out, whether visitors can answer anonymously, and how it handles spam and repeat answers. Run a real five-question survey through any candidate before you commit.

How to choose the best survey plugin for WordPress gives a full criteria list and a test routine. Many of the same points apply to quiz plugins, so if you’ll run quizzes too, the broader guide to choosing a WordPress quiz plugin is worth a read before you decide.

Reading the answers

Where your answers end up depends on whether the visitor left an email, so it’s worth understanding before you launch.

For everyone who starts the survey, Quizably’s analytics show the number of submissions, the completion rate, per-question drop-off and how often each choice option was picked. Since version 1.2.6, a submission starts when the visitor begins, and drop-off includes people who stopped partway, so you can see which question loses people.

For visitors who left an email, every answer, including short text and ratings, appears in the lead’s detail panel and in the Leads CSV export, one column per question.

That has a practical consequence: typed answers and ratings from anonymous visitors are not kept anywhere you can read them. If the open text answers matter to your decision, either ask for an email (skippable is fine) or turn the key question into a choice question that the analytics can chart.

When you read results:

  • Look at drop-off first. A question that loses many people is either confusing or too personal, and the answers after it come from a smaller, more patient group.
  • Read the open text answers in one sitting and group them into themes before counting anything.
  • Compare against the decision sentence you wrote at the start. If the answers don’t point clearly one way, that is a finding too: the choice may matter less to people than you thought.

Privacy basics for surveys

Surveys collect opinions, and sometimes personal details. A few habits keep you on the right side of your visitors:

  • Ask only for what you need. If you don’t need an email, don’t ask for one.
  • Say near the form what you collect and why, and link your privacy policy.
  • If you add a consent checkbox, keep the wording plain.

On the technical side, Quizably hashes IP addresses before storing them, so it never keeps a raw IP, and only users with the right capability can view leads. Rules differ by country, so check what applies to you. This is general information, not legal advice.

Your next step

Write your decision sentence, then draft no more than eight questions that feed it. Cut any you can’t connect to the decision, pick the format from the table above, and build it. Quizably’s survey and poll builder is free to install when you’re ready to build. If you’re starting from scratch, how to write survey questions is the best next read.

Frequently asked questions

What is the difference between a survey and a poll?

A poll asks one question and shows everyone the running result. A survey asks several questions and the answers come back to you, not to the visitor. Use a poll for a quick public opinion and a survey when you need detail to make a decision.

How long should a WordPress survey be?

As short as the decision allows. Five to eight questions suits most general audiences, and fewer is better for cold visitors. Cut any question whose answer would not change what you do.

Can people answer a survey without giving an email?

Yes, if you leave the email form off or make it skippable. In Quizably, the analytics then still show how often each option was chosen, but typed answers and individual responses are only kept with a lead, so plan for that before you launch.

Can a Quizably poll stop people voting twice?

No. There is no one-vote-per-visitor control, so a retake adds another vote. Treat a poll as a light pulse check, not a formal vote.

Do I need a privacy notice for a survey?

If you collect names, emails or other personal data, you usually need to say what you collect and why. Rules differ by country, so check the ones that apply to you. This is general information, not legal advice.

Keep reading